vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

-- Set to true if you have a Nerd Font installed and selected in the terminal
vim.g.have_nerd_font = true

-- [[ Setting options ]]
-- See `:help vim.opt`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`

-- Make line numbers default
vim.opt.number = true
-- You can also add relative line numbers, to help with jumping.
--  Experiment for yourself to see if you like it!
vim.opt.relativenumber = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = 'a'

-- Don't show the mode, since it's already in the status line
vim.opt.showmode = false

-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.opt.clipboard = 'unnamedplus'

-- Enable break indent
vim.opt.breakindent = true

-- Save undo history
vim.opt.undofile = true

-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
vim.opt.ignorecase = true
vim.opt.smartcase = true

-- Keep signcolumn on by default
vim.opt.signcolumn = 'yes'

-- Decrease update time
vim.opt.updatetime = 100

-- Decrease mapped sequence wait time
-- Displays which-key popup sooner
vim.opt.timeoutlen = 300

-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Sets how neovim will display certain whitespace characters in the editor.
--  See `:help 'list'`
--  and `:help 'listchars'`
vim.opt.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }

-- Preview substitutions live, as you type!
vim.opt.inccommand = 'split'

-- Show which line your cursor is on
vim.opt.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 12

-- [[ Basic Keymaps ]]
--  See `:help vim.keymap.set()`

-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- Diagnostic keymaps
vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
vim.keymap.set('n', '<leader>z', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

vim.keymap.set('n', ';', ':', { desc = 'CMD enter command mode' })
vim.keymap.set('i', 'jk', '<ESC>')
-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- TIP: Disable arrow keys in normal mode
vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.highlight.on_yank()`
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function()
    vim.highlight.on_yank()
  end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-- replace with vim.uv.fs_stat eventually
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

-- [[ Configure and install plugins ]]
--
--  To check the current status of your plugins, run
--    :Lazy
--
--  You can press `?` in this menu for help. Use `:q` to close the window
--
--  To update plugins you can run
--    :Lazy update
--
-- NOTE: Here is where you install your plugins.
require('lazy').setup({
  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically

  -- NOTE: Plugins can also be added by using a table,
  -- with the first argument being the link and the following
  -- keys can be used to configure plugin behavior/loading/etc.
  --
  -- Use `opts = {}` to force a plugin to be loaded.
  --
  --  This is equivalent to:
  --    require('Comment').setup({})

  -- "gc" to comment visual regions/lines
  { 'numToStr/Comment.nvim', opts = {} },

  -- Here is a more advanced example where we pass configuration
  -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
  --    require('gitsigns').setup({ ... })
  --
  -- See `:help gitsigns` to understand what the configuration keys do
  { -- Adds git related signs to the gutter, as well as utilities for managing changes
    'lewis6991/gitsigns.nvim',
    opts = {
      signs = {
        add = { text = '+' },
        change = { text = '~' },
        delete = { text = '_' },
        topdelete = { text = '‾' },
        changedelete = { text = '~' },
      },
    },
  },

  -- NOTE: Plugins can specify dependencies.
  --
  -- The dependencies are proper plugin specifications as well - anything
  -- you do for a plugin at the top level, you can do for a dependency.
  --
  -- Use the `dependencies` key to specify the dependencies of a particular plugin

  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
  -- init.lua. If you want these files, they are in the repository, so you can just download them and
  -- place them in the correct locations.

  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
  --
  --  Here are some example plugins that I've included in the Kickstart repository.
  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
  --
  require 'kickstart.plugins.indent_line',
  require 'kickstart.plugins.lint',
  require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps

  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
  --    This is the easiest way to modularize your config.
  --
  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
  { import = 'custom.plugins' },
}, {
  root = vim.fn.stdpath 'data' .. '/lazy',
  defaults = {},
  spec = nil,
  debug = false,
  local_spec = false,
  lockfile = vim.fn.stdpath 'config' .. '/lazy-lock.json',
  concurrency = jit.os:find 'Windows' and (vim.uv.available_parallelism() * 2) or nil,
  headless = {
    -- show the output from process commands like git
    process = true,
    -- show log messages
    log = true,
    -- show task start/end
    task = true,
    -- use ansi colors
    colors = true,
  },
  diff = {
    -- diff command <d> can be one of:
    -- * browser: opens the github compare view. Note that this is always mapped to <K> as well,
    --   so you can have a different command for diff <d>
    -- * git: will run git diff and open a buffer with filetype git
    -- * terminal_git: will open a pseudo terminal with git diff
    -- * diffview.nvim: will open Diffview to show the diff
    cmd = 'git',
  },
  checker = {
    -- automatically check for plugin updates
    enabled = false,
    concurrency = nil, ---@type number? set to 1 to check for updates very slowly
    notify = true, -- get a notification when new updates are found
    frequency = 3600, -- check for updates every hour
    check_pinned = false, -- check for pinned packages that can't be updated
  },
  change_detection = {
    -- automatically check for config file changes and reload the ui
    enabled = true,
    notify = true, -- get a notification when changes are found
  },
  performance = {
    cache = {
      enabled = true,
    },
    reset_packpath = true, -- reset the package path to improve startup time
    rtp = {
      reset = true, -- reset the runtime path to $VIMRUNTIME and your config directory
      ---@type string[]
      paths = {}, -- add any custom paths here that you want to includes in the rtp
      ---@type string[] list any plugins you want to disable here
      disabled_plugins = {
        -- "gzip",
        -- "matchit",
        -- "matchparen",
        -- "netrwPlugin",
        -- "tarPlugin",
        -- "tohtml",
        -- "tutor",
        -- "zipPlugin",
      },
    },
  },
  -- lazy can generate helptags from the headings in markdown readme files,
  -- so :help works even for plugins that don't have vim docs.
  -- when the readme opens with :help it will be correctly displayed as markdown
  readme = {
    enabled = true,
    root = vim.fn.stdpath 'state' .. '/lazy/readme',
    files = { 'README.md', 'lua/**/README.md' },
    -- only generate markdown helptags for plugins that don't have docs
    skip_if_doc_exists = true,
  },
  state = vim.fn.stdpath 'state' .. '/lazy/state.json', -- state info for checker and other things
  -- Enable profiling of lazy.nvim. This will add some overhead,
  -- so only enable this when you are debugging lazy.nvim
  profiling = {
    -- Enables extra stats on the debug tab related to the loader cache.
    -- Additionally gathers stats about all package.loaders
    loader = false,
    -- Track each new require in the Lazy profiling tab
    require = false,
  },
  git = {
    log = { '-8' },
    timeout = 120,
    filter = true,
    throttle = {
      enabled = false,
      rate = 2,
      duration = 5 * 1000, -- in ms
    },
    cooldown = 0,
  },
  pkg = {
    enabled = true,
    cache = vim.fn.stdpath 'state' .. '/lazy/pkg-cache.lua',
    -- the first package source that is found for a plugin will be used.
    sources = {
      'lazy',
      'rockspec', -- will only be used when rocks.enabled is true
      'packspec',
    },
  },
  rocks = {
    enabled = false,
    root = vim.fn.stdpath 'data' .. '/lazy-rocks',
    server = 'https://nvim-neorocks.github.io/rocks-binaries/',
    -- use hererocks to install luarocks?
    -- set to `nil` to use hererocks when luarocks is not found
    -- set to `true` to always use hererocks
    -- set to `false` to always use luarocks
    hererocks = nil,
  },
  dev = {
    -- Directory where you store your local plugin projects. If a function is used,
    -- the plugin directory (e.g. `~/projects/plugin-name`) must be returned.
    ---@type string | fun(plugin: LazyPlugin): string
    path = '~/projects',
    ---@type string[] plugins that match these patterns will use your local versions instead of being fetched from GitHub
    patterns = {}, -- For example {"folke"}
    fallback = false, -- Fallback to git when local plugin doesn't exist
  },
  install = {
    -- install missing plugins on startup. This doesn't increase startup time.
    missing = true,
    -- try to load one of these colorschemes when starting an installation during startup
    colorscheme = { 'habamax' },
  },
  ui = {
    -- If you are using a Nerd Font: set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})

-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et